November 14, 2012
By Paul Gipe
Build Your Own Small Wind Power System was written by a small wind systems dealer, Kevin Shea, and a professional journalist, Brian Howard.
Be forewarned, this is a big book. It’s a modern book. It uses all the techniques necessary to keep modern readers attentive: sidebars, bullet points, and copious illustrations.
The touch of a professional writers shows: The writing is both crisp and clear.
There has been a slew of new books in the past few years on small wind. So many it has been hard to keep up with them all-and admittedly I am not keeping up. (I have had this book on the shelf for at least six months.) Some are by pros, such as Ian Woofenden, and some are by professional writers, such as Dan Chiras. This is one of the first by both.
I must admit, the competition is forcing me to up my game. I too write books about wind energy and I take my photographs of wind turbines seriously.
Build Your Own Small Wind Power System has a number of useful illustrations and photos that, frankly, I don’t have in my books. So, even this old dog has to learn some new tricks to stay current.
Privately, I’ve complimented Brian Howard on some of his photo picks. Some of the photos are in the public domain and good enough I might very well use them myself. I can’t think of a higher compliment than to use a few of those in one of my books.
I suspect that the authors anticipated the book would be printed in color. Many of the illustrations would have been better served in color than black & white.
As a journalist, Brian Howard has one weakness. He feels it’s necessary to present both sides of some of the debates swirling around small wind turbines. He’s good at presenting the weakness of some of the arguments, such as those promoting small vertical-axis wind turbines, and if you can read between the lines you can guess where he stands. But he doesn’t say unequivocally that some of these designs are a waste of time or that their promoters are simply hustlers and charlatans. Fortunately, he does quote me and Mick Sagrillo liberally. And no on has ever accused either one of us of being subtle.
Build Your Own Small Wind Power System, thus, has extensive sections on both VAWTs and building-mounted wind turbines. Sagrillo and I regularly rail against these two topics and so it may grate for us to see these subjects treated in a book like this.
Nevertheless, any vibrant, growing industry needs new blood and that new blood will, by necessity, do things their way whether the gray beards like it or not. Everyone makes a contribution even if it’s two steps forward and one step back. We’re still making progress.
Two big pluses for Build Your Own Small Wind Power System are the authors’ emphasis on swept area rather than power ratings. And the authors’ clear preference for feed-in tariffs as the policy mechanism that is most likely to make small wind come of age in the US. If readers take nothing else from the book, these two lessons alone are worth the cost of the book.
Nothing tells you more about a wind turbine than swept area and the authors hammer that point home.
And no other policy mechanism has done more for renewable energy development worldwide than feed-in tariffs. The authors get it when some of America’s leading renewable energy advocates don’t.
Despite my initial misgivings that the inclusion of so much on VAWTs and rootop wind would detract from the subject, Build Your Own Small Wind Power System is a keeper and a welcome addition to my growing wind power library.
Build Your Own Small Wind Power System by Kevin Shea and Brian Clark Howard, McGraw-Hill/TAB Electronics, 7.4 x 0.9 x 9.3 inches, 512 pages, ISBN-10: 0071761578, November 2011, $25.00.
This is one of the books in My Series the Green Guru Guides. Loving the TAB DIY crew.
Build Your Own Small Wind Power System – A Review