# The New 2022 BMW i4 eDrive40 and i4 M50

- Link: https://greenlivingguy.com/2021/12/the-new-2022-bmw-i4-edrive40-and-i4-m50/
- Published: 2021-12-28T16:03:59-05:00
- Author: greenlivingguy

BMW is proud to announce the newest additions to the BMW i brand, the i4 eDrive40
and i4 M50 models.  The i4 M50 is the first fully-electric performance model to 
come from [BMW](https://greenlivingguy.com/2018/04/bmw-group-e-sales-2018-grows-71-percent/)
M GmbH. The i4 blends the functionality and space of the gran coupe design with 
the instantaneous power delivery of BMW’s latest 5^(th) generation eDrive. Class-
leading driving dynamics and long-distance comfort, elegant design, uncompromising
workmanship, cutting-edge user-vehicle interface, and advanced infotainment, and
driving assistance technologies all combine to deliver a zero-emissions BMW worthy
of the Ultimate Driving Machine moniker.

Power is provided by BMW’s latest 5th generation eDrive [technology which combines electric motors](https://greenlivingguy.com/2015/02/uqm-technologies-wins-4-million-doe-grant/),
power electronics, a charging system, and a high-voltage battery. The electric motor,
power electronics, and transmission share one compact housing while the high-voltage
battery measures only 4.3-inches in height. In addition, it sits low on the floor
of the new i4 for the best vehicle agility.

BMW Group has been producing battery modules and high-voltage batteries since 2013
and this in-house experience shows, with the latest generation of batteries, found
in the i4, having a maximum DC fast-charging capacity of up to 200 kW and AC Level
2 charging of up to 11 kW.

![](https://i0.wp.com/greenlivingguy.com/wp-content/uploads/2021/12/P90423598-lowRes.
jpg?resize=420%2C272&quality=52&ssl=1)

## **Sustainability and Reduced Carbon Footprint**

Sustainability is an integral part of the development of the new BMW i4, from the
sourcing of materials to the production of the i4 itself and to the recycling of
its components in the future. Every step of the value chain carefully looks to reduce
the carbon footprint of the i4 to the absolutely lowest level possible.

Steps taken by the BMW Group include commitments from all battery cell suppliers
for 5^(th)generation BMW eDrive technology to only use electricity from renewable
sources. The aluminum electric motor cases are from purely [green energy](https://greenlivingguy.com/2020/05/5-ways-to-live-greener-at-home-using-solar-power-and-ai-products/).
The i4’s production at [BMW Group Plant](https://greenlivingguy.com/2019/07/bmw-plant-spartanburg-double-battery-assembly/)
in Munich uses only local hydroelectric power.

The electric motors for the BMW i4 do not use rare earth materials. That allows 
the BMW Group to not be reliant on their availability. The proportion of secondary
aluminum used in the i4 helps to make manufacturing more sustainable. Targeted use
of recycling methods for this high-grade lightweight metal can lead to a substantial
reduction in the energy-intensive use of primary aluminum, which also generates 
high levels of CO_(2)emissions when conventional manufacturing techniques are employed.
Besides this, recycled plastics are used in many i4 components.

![](https://i0.wp.com/greenlivingguy.com/wp-content/uploads/2021/12/P90422899-lowRes.
jpg?resize=300%2C212&quality=52&ssl=1)

## **Electric All-Wheel Drive, Wheel Slip Limitation and Launch Control**

With an electric motor at both ends, the new i4 M50 features an electric all-wheel-
drive system. It increases traction in all road conditions and can optimize traction
and handling stability. All by adjusting the drive torque, without the need for 
traction control intervention.

The fully variable system can choose the exact split. From the highly efficient 
pure rear-wheel drive to all-wheel-drive for maximum traction. Normally, drive power
relies solely on the i4 M50’s rear wheels to increase its efficiency and range. 
At higher levels of lateral acceleration or in response to wheel-slip, the motor
acting on the front wheels assumes drive power. It delivers to optimize [driving dynamics and directional](https://greenlivingguy.com/2025/10/lexus-rx-500h-direct-drive-2026-test-drive-results/)
stability.

The BMW-developed near-actuator wheel slip limitation. In combination with the electric
all-wheel drive, enables the car to maintain optimum traction in a straight line.
Especially for the instantaneous power delivery of electric motors, this traction
control system integrates into motor management. This eliminates the long signal
paths to the control unit for the DSC (Dynamic Stability Control). Meaning that 
the corrective inputs apply up to ten times faster than in conventional systems.

Near-actuator wheel slip limitation is fitted on both the rear-wheel-drive BMW i4
eDrive40 and the all-wheel-drive BMW i4 M50. The near-actuator wheel slip [limitation brings the advantages of rear-wheel drive](https://greenlivingguy.com/2026/07/toyota-crown-signia-limited-2026-test-drive-results/)
to the world of electric mobility. That’s in the BMW i4 eDrive40. Whereas the BMW
i4 M50 it is set up for optimum, rear distribution of drive torque between the two
axles.

## **Integrated Braking System**

The integrated braking system helps to eliminate unwanted pedal feedback during 
brake regeneration. It enables Brake Energy Regeneration at a maximum rate of 195
kW on the i4 M50 and 116 kW on the i4 eDrive40, thereby boosting efficiency and 
range. Thanks to the cutting-edge technology, the brake activation, brake booster
and braking control functions are in a compact module.

Drivers trigger the brake pressure using an electric actuator. That’s an operating
principle that generates pressure more dynamically and ensures significantly faster
and more precise interventions. That’s from the driving stability control system.
The braking system generates stopping power. It’s precise to the driver’s inputs
while producing a consistent pedal feel. In addition, it’s unimpaired by any pulsing
as a result of wet road surfaces. Also, significant lateral acceleration, or high
brake temperatures.

![](https://i0.wp.com/greenlivingguy.com/wp-content/uploads/2021/12/P90423611-lowRes.
jpg?resize=300%2C226&quality=52&ssl=1)

## **Exterior Design**

The [BMW](https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjqhd6gsof1AhUdhVoFHYuBADQYABAAGgJ2dQ&ae=2&ohost=www.google.com&cid=CAESQeD2NaCV1hJCX9mvcoO6rmDrpEWSwfBjAIzoD6QROh90XZUWCVF6-JQmV7Ld-XterxF5VqNnjdxFpC6SlWJjcaI3&sig=AOD64_181JNeh4wQRzyvOGK5vsJs-DBslQ&q&adurl&ved=2ahUKEwj75tKgsof1AhV_TDABHe5-D8oQ0Qx6BAgCEAE&dct=1)
i4 combines the hallmark sporting aesthetic of the brand’s coupés with the comfort
of a four-door car. There are elegant proportions of the new BMW i4. For example,
the short overhangs, slim pillars, doors with frameless windows, and a roofline.

At the heart of the front end stands the striking, BMW kidney grille, which is largely
blocked off due to the small amount of cooling air required by the electric drive
components. Moreover, depending on the specification, the car’s front camera joins
by ultrasonic and radar sensors. BMW integrates them discreetly into the surface
of the kidney grille. The front bumper of the BMW i4 also has only a small number
of openings. These include the air curtains positioned towards its outer edges, 
which direct air efficiently past the wheels. Clear modern design surfaces cover
the front end. almost entirely in body color, precise lines and black inlays.
